Skip to product information
1 of 2

High Voltage Generator 40-60 kV

High Voltage Generator 40-60 kV

Regular price €2.415,00 plus VAT
Regular price Sale price €2.415,00
Sale Sold out

High power generators for high voltage, sealed inside metallic enclosure.

Please notice that the analog voltage generator cannot be used alone and must be integrated with a control panel.

HIGH VOLTAGE GENERATOR 40 KV

High Voltage Generator 40 KV is a compact, high voltage generator which can be installed and positioned directly in the electrospinning chamber for maximum safety in the laboratory, avoiding to lay cables conveying high voltage from the control system to the experiment and only using very low voltage signals.

WHAT ADVANTAGES DO YOU GET FROM USING THIS GENERATOR?

The output voltage reaches 40 kV in direct polarity and up to 0.375 mA of continuous current can be supplied.

All the electrical connections for the remote control of the voltage are located on a practical 15 pole connector at the end of a highly flexible shielded cable which also provides the 24 VDC power supply.

HIGH VOLTAGE GENERATOR 60 KV

High Voltage Generator 60 KV is the ready-to-use version of a high voltage generator specifically adapted for electrospinning, which can be controlled directly through analog signals in 0-10 V voltage.

GENERAL INFORMATION

HV GENERATOR 40 KV

  • Width: 26 cm.
  • Depth: 16 cm.
  • Height: 9 cm.
  • High voltage capable length (with metallic shield): 0.5 m.

HV GENERATOR 60 KV

Width: 50 cm.

Depth: 25 cm.

Height: 50 cm.

High voltage capable length (with metallic shield): 3 m.

HIGH VOLTAGE GENERATOR

HV GENERATOR 40 KV

  • Output voltage range: 0...40 kV.
  • Maximum current rate: 0.375 mA.
  • Voltage precision: 0.1 kV.

HV GENERATOR 60 KV

  • Output voltage range: 0...60 kV.
  • Maximum current rate: 1 mA.
  • Voltage precision: 0.1 kV.

    ANALOG INTERFACE

    HV GENERATOR 40 KV

    • 0-5 VDC corresponding to 0 - 100% of output voltage: Monitor.
    • 0-5 VDC corresponding to 0 - 100% of output current: Monitor.
    • 0-5 VDC corresponding to 0 - 100% of output voltage: Command.
    • 0-5 VDC corresponding to 0 - 100% of output current: Command.
    • Interlock input: No.
    • Enable input: Yes.
    • High voltage ON output: No.
    • Fault output: No.

    HV GENERATOR 60 KV

    • 0-5 VDC corresponding to 0 - 100% of output voltage: Monitor.
    • 0-5 VDC corresponding to 0 - 100% of output current: Monitor.
    • 0-5 VDC corresponding to 0 - 100% of output voltage: Command.
    • 0-5 VDC corresponding to 0 - 100% of output current: Command.
    • Interlock input: Yes.
    • Enable input: Yes.
    • High voltage ON output: Yes.
    • Fault output: Yes.

    HV GENERATOR 40-60 KV COMPATIBILITIES 

    This generator can be associated with the RT Collector to create an integrated device for the spatial control of voltage and nanofiber deposition in order to progressively change the diameter of the fibers during the actual deposition.

    FURTHER COMPATIBILITY (40 KV ONLY)

    It can also be combined with the High Voltage Generator & WEB Interface 40-60 KV to create a double generator system so as to obtain sophisticated configurations of the electrical field or limit the absolute value of the voltages involved, if acquired with inverse polarity.

    View full details